Categories
Refine Results
Makes
- Addict (1)
- District (2)
- French ID (2)
- Grit Scooters (2)
- JD Bug (8)
- LG Pro (2)
- MADD (3)
- Micro (1)
- Mutts (1)
- Slamm Scooters (1)
- Yak (1)
Categories
Cancel
Manufacturers
Micro Scooter Accessories - Spares
This is our selection of Micro Scooter Spares and Accessories We stock a wide range of upgrades and replacements for push scooters. No matter whether you are still riding your first beginner scooter or freestyle riding in skate parks we stock all the parts to hep maintain your ride! We stock handle bar grips, clamps, compression kits, SCS, threaded and threadless forks, spring and flex fender brakes, decks, griptape, sealed headsets, axles, wheel bearings, stunt pegs and more!
Addict Scooter 10mm ICS Kit
The first Addict Collection is the result of 3 years of brainstorming, development, and innovation. Each part has been tested by some of the best street riders in the
movement today, for months we created and shredded, until we finally had
the approval of the riders and designers...
£7.95
District Inverted Compression Kit / System for Micro Scooters - Required for fitting threadless
forks to scooter bars for ultimate confidence when riding with a
threadless headset. Perfect for district forks, but will fit
other combinations requiring a short ICS bolt. (washers may be required) Contents -
1.25" Diameter Double Star nut-...
£9.95
French ID Star nut - Star flanged nut for use inside handlebar tubes to allow pre-load of headset bearings.- Standard M6 x 1.0 thread.- Available in two sizes: 29.3mm diameter(Bars) and 26mm Diameter (Steel forks) - May fit other brands of handlebar. Please measure the internal diameter of your handlebar before ordering.- Sold singly.
£5.00
French ID Compression Kit
- A new Compression Kit from French ID including all the parts you need to fit your French ID bars and French ID forks together.
- Designed to work specifically with French ID Bars and French ID Forks.
- Allows threadless Aheadsets to be used on your scooter.
- Tested by the French ID international team riders.
-...
£19.00
Grit Scooters Compression Kit with Star NutThis ICS kit is for assembling a threadless scooter setup. This is the same kit that is supplied with the Grit Threadless Forks. To assemble you need to tap the starnut into the base of your bars.
£9.95
Grit Scooters Front and Rear Axle with Spacers (2011) Should fit all 2011/2012 Grit Scooters such as Mayhems, Elites, Fluxx and Invaders.
£6.50
JD Bug Front Axle Bolt (Short Bolt) 6116
This will fit most scooters such as razor and micro front wheels and other similar products such as streetsurfers.
Length of sleeve is 27mm
3/8 inch diameter (skate axle size)
£2.99
The JD Bug Bolt Kit The purpose of this kit is to replace the folding mechanism and reinforce the scooter for trick and freestyle use. The Scooter will no longer fold and collapse with the bolts in place. This is the Pro Extreme Fixed Bolted System and is compatible with ANY FOLDING JD BUG micro scooter besides the Eco model which we do not...
£4.95
JD Bug Rear Axle Bolt (Long) 6116A
This may fit other scooters etc.
Length of sleexe (axle) 60mm
Diameter is 3/8 inch (skate axle)
£2.99
JD Bug Headset Bearings inc Ring - These are the exact replacement part for most sub £100 JD Bug Scooters. They will fit other brands as well such as Slamm scooters which use threaded headsets. If you are looking for a higher grade headset to replace these check out the more premium threadless headsets from District and Blunt. JD Bug Part Number...
£6.99
JD Bug Pro Street Lower Stem in Lilac for a JD
Bug MicroScooter
£7.99
JD Bug Pro Series PRO Series Head SectionThe complete MS130 series head section including bearing race cups available in 7 different
colours and all with the PRO Series logo.
Available in Blue, Black, Bronze, Lilac, Orange, Red & Yellow
Remember to purchase your JD Bug headset bearings or a new headset with this item!
£11.99
LG Pro Scooters ICS Compression Kit.This is a kit to fit ICS (Inverted Compression System) to threadless forks and headset and standard size bars. This bolts up through the forks from the bottom into the star nut inserted into the bars and provides compression adjustment for the headset of the scooter.It contains:1 x Starnut for Standard...
£9.95
LG Pro Threaded Scooter Maintenance Tool Kit - The main tools you need to tighten and adjust your threaded headset and wheels on your scooter and it comes in a small case still large enough to hold some other spare tools or scooter accessories.
Features:
Two headset spanners (Fits JD Bug/Madd/Razor/Slamm and...
£19.95
MADD Front and Rear Axle Bolts + Spacers These fit the MADD Base and Team Scooters but do NOT FIT THE NITRO or NINJA
Available in Silver or Black
£6.99
The MADD MGP Allen Key Tool is the tool that is supplied when buying premium Madd complete scooters. It is the best allen key we have found so here it is! Its long, and you can get a great hold on your bolts and axles when maintaining your scooter.
You can use this tool for tightening up your axles and clamp.
Size 5...
£5.95
The Micro Arch is a replacement if you break your existing one.
This will fit the Bullet and Sprite models of scooter.
£14.99
The Mutts Micro Scooter Headset Spanners are
high quality machined tools specially made for tightening the
headset nuts on scooters and BMX. Two spanners, a fat one and a thin
one to specially reach both nuts.
These are both 36mm sized spanners which should fit most scooter headsets out there. Uniquely styled handles...
£19.99
Slamm Scooters Threaded 1 1/8" unsealed headsetOversized bottom cup and bearings for extra strengthComes as standard on the outbreak and pro complete models
£11.99
Shopping Cart
Cart empty
Search
What's New
Special Offers
Keep in touch
