Mountainboard Accessories - Spares
Accessores and Spares for mountain board and kite boards. Everything to keep you riding from inner tubes, odd nuts and axle bolts to washers, trucks, new hubs and tyres. If you don't see what you are after please contact us as we can get pretty much anything! We have been involved since the start of mountainboards so can always help to get old boards up and running again.
These are Standard bearings to fit a standard mountain board wheel. They fit most boards out there such as MBS, noSno, Scrub, Exit, Bluearth, Kheo, Ground Industries, Flexifoil and pretty much any others.... There are 3 different sizes: 6001-2RS - 12mm Axel (Channel Truck) board. R6-RS - Skate Truck 10mm Axle Boards PrimoSk8 - 10mm Axle Standard...
£10.00 - £12.00
These are new springs to refresh and stiffen up your channel truck board and stop the dreaded speed wobble.If you have springs over a year then you will probably benefit from new set of springs.They fit MBS, Mongoose, Exit, Scrub, Blue Earth and many other boards that use the channel truck steering system.
£12.00
The Mountain board Innertube is a highly exciting product but also is quite useful to have around. You can repair inner tubes with normal cycle repair kits but if out for the day it is easier to just swap over with a spare and sort out the puncture when you get home! Also if you repair an inner tube more than 3 times then it is normally time to...
£4.99 - £6.99
The Ground Industries Bonded T3 Cubes are to fit the 2006 onwards Ground Industries Boards. These do not fit the earlier boards unless you upgrade the hanger units to the new plastic ones. The boards come with the HD4 cube as standard. Check the chart out below to work out the best cube for your setup.
These are sold as a pair so enough to...
£18.49
Khiro Large Hard Skate Truck Pivot Bushings - Large Hard Pivot Cups which fit Mountainboard trucks, these things are seriously though, possibly 10 times tougher than the Scrub and twice as hard wearing as the MBS alternative.
If you and your board eat pivot cups, this is what you need!
Only recently become easily available into the UK, we...
£3.99
What can be said about this kit.... it is contains almost all spare parts for most MBS boards. The bolts used on the boards can be hard to find replacements when you happen to loose one in a field or the woods and this contains almost all of them. It is hard to put a price on this if you keep it tucked away in your backpack and can keep riding...
£20.00
The MBS Eggshocks are the small plastic/rubber dampers that fit inside the springs on the board to dampen vibrations such as speed wobble. They do wear over time and are worth replacing after about a year of use. Also heavier riders or riders wanting higher speeds would be worth upgrading to stiffer shocks.
They come in three strengths;...
£10.00
The MBS Matrix Hanger is a replacement for the plastic top part of the Matrix Truck. This is very useful if you have broken your truck from hitting an object as this part breaks before any other part of the board. If you have lost any other parts of the truck we will have spares please contact us.
£8.00
The MBS Skate Vector Truck Bushes are the replacement bushes for the mbs skate and vector trucks.
They are similar to standard skate bushings but the top bushing is slightly bigger. This gives sufficient clearance for the vector truck under maximum turn. Normal Skate truck boards may be able to get away with simple bushes like the Doh-Doh...
£4.00
The MBS Camlock Buckles are the buckle often prefered by kite flyers. It locks the binding into one position so it can't be hit or adjusted by accident. Not so popular for downhill riders who normally want the bindings as tight as possible for more control.
Kiteflyers on the other hand often found it annoying if when jumping off the board...
£11.00
These are new springs to refresh and stiffen up your MBS channel truck board and stop the dreaded speed wobble. These are the MBS Black Version rather than the chrome standard alternative.
If you have springs over a year then you will probably benefit from new set of springs.
They fit MBS Matrix Trucks and pretty much all other boards that...
£14.00
The MBS Stainless Steel Bearings are exactly what they sound like.... fully stainless steel bearings for the hubs. But what they don't say is that they are a very good grade stainless steel which does greatly extend life compared to standard bearings.
These are only really worth worrying about if you are riding a lot on the beach.
We were...
£35.00 - £38.00
The MBS Matrix Kingpin Bearings come in a set of 4 and replace the bearings inside the plastic hanger on the MBS Matrix truck.
£10.00
High-precision nylon MBS Vector Pivot Cups are the essential link between
the moving parts of the Vector Truck System. Although they are hidden
away in the inside of the truck, they have a very obvious impact on the
overall performance and precision of Vector Trucks. Because the new
nylon material is harder than the traditional...
£5.00
The MBS Bearings come in two styles, Matrix and Skate.
All TerrainTruck Bearings (set of 8)
(8) 9.5 X 28mm bearings.
Fits RockStar hubs and Tri-Spoke hubs
Fits All Terrain Skate trucks.
Matrix Axle Bearings (set of 8)
(8) 12 X 28mm bearings.
Fits RockStar hubs, TriSpoke hubs and Atom wheels.
Fits Matrix and Matrix...
£12.00
The MBS Matrix Coloured Top Hanger is a replacement for the plastic top part
of the Matrix Truck. This is very useful if you have broken your truck
from hitting an object as this part breaks before any other part of the
board.
If you have lost any other parts of the truck we will have spares please contact us.
New for 2009 the MBS...
£8.00 - £9.00
High-precision nylon MBS Skate Truck Pivot Cups are the essential link between
the moving parts of the MBS Skate Truck System.
(Also compatible with all other mountainboard skate trucks)
Although they are hidden
away in the inside of the truck, they have a very obvious impact on the
overall performance and precision of Skate Trucks....
£3.00
MBS Rockstar Pro Brake Spacers are used to fit the MBS V5 brake discs to rockstar Pro Hubs.
£6.00
MBS Matrix Pro Top Truck Bushes - Comes as a set of 4 Bushses
£5.00
The Scrub Rubber Grip is two die cut sections of the grip tape.
The rubber grip gives much better performance than standard "skate" grip in wet and sandy conditions. It is also very long lasting on any board.
£6.50
These are a range of egg shaped inserts that allow you to adjust the boards steering from easy to hard. Thus allow easy carving or high speed downhill bombing. They fit MBS, Mongoose, Exit, Scrub and many other boards that use the channel truck steering system.
£5.00
The Scrub Spares Kit for Skate Trucks is a essential bit of kit to keep your board in top condition and replace any screws, bolts, nuts and many other bits that might come loose or get lost over time using the board.
You get a full set of rubbers + pivot cups, 4 binding bolts, 4 T-Nuts, 4 Wheel Nuts + loads of spare deck/truck bolts, screws and...
£7.95
The Scrub Spares Kit for Channel Trucks is a essential bit of kit to keep your board in top condition and replace any screws, bolts, nuts and many other bits that might come loose or get lost over time using the board.
You get two springs, set of medium eggs, 4 binding bolts, 4 T-Nuts, 4 Top Hats, 4 Wheel Nuts + loads of spare deck/truck bolts,...
£15.99
The Scrub Kingpins are suitable for the Scrub aluminium channel truck as a replacements for the original. Buying the Kingpin set is the only way to purchase spare washers as Scrub do not sell these separately.
£6.00
The Scrub Stainless Kit provides all of the bolts and pins required to refit your entire Scrub board with Stainless nuts and bolts.
Great for use in damp or sandy conditions.
The kit is available for Skate (£17) and Channel (£20) setups.
£17.00 - £20.00
Set of two replacement Scrub Skate Truck Pivot Cups for skate style mountain board trucks. Only one pivot cup is required per truck.
High-precision nylon Pivot Cups are the essential link between the moving parts of the Skate Truck System.
SOLD AS A PACK OF 2 CUPS
£2.50
The Trampa Dampas are a great invention from Trampa and take the egg concept to a new level. They are designed slightly longer than an eggshock to fill the whole gap in between the cups in a matrix truck so there is no wobble in the top of the truck and screwing the springs down is not required. The 3 balls design also helps to give progressive...
£10.00
Trampa Blue Channel Springs Specifications
Weight: 258 g
Blue Powder coated springs x 4
colour customise your springs
springs made to same spring
rate as others in range
£13.95
Trampa ABEC 5 Trampa Bearings RED Set of 8 Specification
Weight: 160 g
ABEC 5 rated Bearings
Easily identified by red
painted sidewalls
Bearings fit all known
mountainboard hubs designed to fit 12mm axles
ABEC 5 Polished
Strengthened and Painted RED side walls
Higher top end speeds
TRAMPA...
£12.95
Trampa Red Channel Springs Specifications
Weight: 258 g
RED Powder coated springs x 4
colour customise your springs
springs made to same spring
rate as others in range
£13.95
Trampa White Channel
Springs Specifications
Weight: 258 g
WHITE Powder coated springs x 4
colour customise your springs
springs made to same spring
rate as others in range
£13.95
Trampa Channel Truck Upgrade Kit - Perfect for upgrading both your Trampa/Scrub/MBS matrix style channel trucks to shiny new trampa components with no need for peny washers, Horah!
Weight: 416 g
4x Polished Springs 4x Green Dampa's 8
x retainers 4 adjusters and fixings
renew your steering system
every once in a while, fresh...
£28.00
Trampa ABEC 5 Skate Trampa Bearings RED Set of 8 Specification
Weight: 160 g
ABEC 5 rated Bearings
Easily identified by red
painted sidewalls
Bearings fit all known
mountainboard hubs designed to fit 10mm axles
ABEC 5 Polished
Strengthened and Painted RED side walls
Higher top end...
£14.95
Trampa ABEC 5 Trampa Bearings Blue Set of 8 Specification
Weight: 160 g
ABEC 5 rated Bearings
Easily identified by red
painted sidewalls
Bearings fit all known
mountainboard hubs designed to fit 12mm axles
ABEC 5 Polished
Strengthened and Painted BLUE side walls
...
£12.95
Shopping Cart
Cart empty
Search
What's New
Special Offers
Keep in touch
