Using an Anti Spark Switch is a good way of fully powering off your electric skateboard neatly rather than unplugging wires or using a loop key. This version of the switch has a led power light and takes 280A continuous current and max burst of 800A based on 12S batteries.
If you are unsure what you need please contact us as this a more technical part and requires some experience with electric boards and systems.
Flipsky Anti Spark Switch Pro 280A Specs:
- V3.0
- Mosfets: HYG015N10NS1TA
- LED button diameter: 16mm
- Voltage range: 3S-14S (12V-60V)
- Max current: 280A
- Continuous current: 100A
- Burst current 1200A(theoretical current)
- PCB thickness: 6 layer*3oz copper=18oz copper
- Pro V3.0 Dimensions(with heatsink and heat shrink): 42.2mm x 33mm x 26.6mm
Reminder : the LED button is default inserted in the switch in shipping status, DO NOT power on switch without the LED button connected.
Flipsky Electronic Products Warranty:
All ESC and motors are 100% tested and shipped as a good product before shipment. Any uncertain connection or information for VESC/Motors settings, please contact us before your installation.
The warranty period for Flipsky consumable electronic products (eg. VESC/Motor/Battery/Remote/Antispark switch) is guaranteed for 2 months since shipment. Please contact ATBShop to process the after-sale service. You can return it to us for analysis as a manufacturing failure. If the replacement or repair is not possible for you, a discount can be provided for the new replacement.
The following conditions are not covered by the above warranty:
- Cannot provide purchase channel source proof
- Mechanical damage to electronic components or PCB
- PCBA board has repair soldering iron traces (excluding solder the cable bullet connectors)
- Wire damage or external impact damage
- (For non-waterproof products) there is water inflow
- Abnormal applications beyond the product specifications