Burton Re:Flex Binding M6 Hardware Pack
This replaces the bolts that come with the ReFlex Bindings from Burton. It has the bolts for the channel and for standard four hole burton bindings or the 3D system.
If you have Burton Disc , Standard or Re:Flex Bindings and need to replace the bolts then this is the kit for you. It has the bolts for 4 hole standard boards and also the 3D Burton Disc bindings. Plus there are the EST Channel bolts included as it's the same pack that comes with Burton Reflex Bindings.
This pack does not come with the claw washers and T Nuts for the Channel board and EST Bindings you would need the other spares pack if you have EST bindings and channel board. This pack will fit your Burton Disc bindings to practically all other brands of snowboard as well as the channel system if you have the right disc already.
Burton M6 Snowboard Binding Hardware Contains:
- 8 x M6 x 16mm Std Binding Bolts and Washers
- 4 x M6 x 13mm EST Binding Bolts and Washers
If you only require the M6x16 screws for disc bindings to 4x4 hole board then we have a different pack available too. Please check it here.