MBS Motor Mount Drive Belt HTD 5M 15mm
This is the toothed belt for the MBS Motor Mount system if used with the 72T Pulley. Select the size depending if you are using the idler pulley.
£12.95
In Stock & available for UK next day delivery
This is the toothed belt for the MBS Motor Mount system if used with the 72T Pulley. Select the size depending if you are using the idler pulley.
These belts are HTD 5M Tooth spacing and 15mm wide. If you are using different wheel or pinion sizes then would need different size belts. But for the standard MBS pulley the sizes are below:
Recommended belt size when using MBS 72T Wheel Pulley is:
- 475mm - no idler pulley
- 520mm belts - Using a 32mm idler pulley in the center position