Moon E-Skate AT Moon Drive Mounting Clamps
These are the clamps to fit each type of truck and they come complete with mounting hardware for that truck system. Supplied as a pair of clamps.
Want to fit the Moon AT Gear Drive on to a different truck system then you can just switch round the clamps and the rest of the system with fit as long as the spacers are correct. If you don't have the drive system then it's better to buy that complete for the right system as then you get all the right spacers and bolts for the trucks and wheels. We recommend using green loctite 638 for the clamp and grubs as well as the pinion gear to stop anything coming loose.
Please note the picture above is for reference and a matrix3 clamp, the clamps are different for each truck system.
The Trucks this fits are as follows:
- Trampa CNC - This fits all the trampa trucks with the 19.5mm Square CNC on the end of the axle
- MBS Matrix 2 - This fits the Matrix 2 MBS Trucks. Note you may need to change the grubscrew or file it down so the clamp slides on smoothly.
- MBS Matrix 3 - This fits all the Matrix3 and CNC trucks and comes with 2 more bearings as different to the normal kit bearings.
Package Contents:
2 x Truck Mounting Clamps
8 x Grubscrews (Lock bolts for Matrix2 Trucks)
