ATBShop MBS Matrix3 Truck Risers 5 Degree Pair
These are a pair of 3D printed 5 degree plastic risers for the MBS Matrix 3 CNC Trucks. For decks with a lower tip angle to increase turn rate in the trucks.
These are a pair of 3D printed 5 degree plastic risers for the MBS Matrix 3 CNC Trucks. For decks with a lower tip angle to increase turn rate in the trucks.
Suitable for any standard deck these 5 degree risers are switched over instead of the rubber shock pad and increase the angle of the truck to give faster turning. Great on lower tip angle decks without needing any extra long trucks bolts etc. Many mountainboard skate style decks are 20 or 22 degrees which is not enough to turn so adding these give a much better turn to lean ratio. If you go more than 5 degrees then often problems with bolts not lining up properly etc.
Sold as a Pair and are 3D printed in store from Recycled Black PLA+ plastic so sometimes can be a short delay if the stock is low.
As a guide to deck tip angle for channel trucks:
- 30 Degree - Balanced
- 35 Degree - Carvey
- 25 Degree - Stable
