ATBShop Haero Deck Stainless Binding Bolt Set
The Haero Deck has inserts so to fit MBS F5 or Trampa Ratchet bindings you need some short socket cap screws. Comes as a set of 8 bolts with washers in Marine Stainless Steel
£7.95
Search results for 'I Skute' - 58 Results
ATBShop High Tensile Scooter Axle Kit
Need to upgrade your scooter axle then this is ideal. Super strong high tensile axle for your scooter. Comes complete with lock nut and washers in a set.
£2.00
ATBShop Mountainboard Inner Tube
Its not an exciting purchase but unfortunately accidents do happen. These mountainboard inner tubes are perfect for keeping you rolling on your kite or mountain board.
£6.95 - £10.99
ATBShop Mountainboard Wheel Bearings
Standard wheel bearings for your mountainboard from ourselves. Come as a pack of 8 bearings and fit most brands but consult the bearing size chart to check fitment.
£7.95 - £17.50
Bulldog Surf Bolt SUP Thumbscrew Fin Bolt
Simply attach, remove or adjust single fins, with no need for a screwdriver you'll have more room for key bits of kit. With its quality stainless steel design no need to worry about breaks.
£3.95
Burton 3D M6 OG Binding Discs
These discs are to fit the Burton Disc bindings from 2008-10 for 3D standard 3 Bolt M6 System. Make your old bindings work with the Burton 3D system.
£10.95
Burton Highback Mounting Hardware Kit
These are the bolts that hold the highback onto the main chassis of the bindings. There are two kits this is the most popular Kit 2 for newer Cartel and similar bindings.
£7.95
Burton M6 4x4 and Channel Binding Discs
These discs are to convert the Burton Disc bindings from 2008-10 over to 4x4 standard or the new M6 Channel System. Make your old bindings work with the new system.
£7.95
Burton M6 Channel Inserts Pack of 4
These are a pack of spare inserts for your M6 Burton Channel Board. Fit boards from 2011 onwards. Great if lost them or need some new ones.
£7.95
Burton Reflex 3D Hinge Binding Discs
These discs fit the burton Reflex bindings and allow you to fit them onto your Burton board which has the 3D mounting holes. Perfect if you have an older board you love and want new bindings.
£9.95
Burton Reflex Combo Hinge Binding Discs
These discs fit the burton Reflex bindings and allow you to fit them on the channel system and onto other board brands which have the standard 4x4 or 4x2 holes.
£9.95
Demon Snow Binding Hardware
Bolts fixing your bindings to the board gone rusty? Then grab a set of these. Should fit any standard bindings just check the length of bolts without existing ones.
£9.00 £8.95
Flysurfer Speed & Soul Pulley Lines
The Pulley lines on a Flysurfer Speed or Soul wear and stretch in general use so it's worth replacing before breaking, always replace all pulley lines together for safety.
£14.95 - £59.95
MBS F5 Bindings Replacement Ladders
Accidents happen and ladders wear out on your bindings, grab a new set to freshen up or repair your F5 Bindings. Comes as a full set of 4 Ladders.
£8.95
MBS Matrix II Mountainboard Shock Blocks
These are the new bushings for the Matrix II and Matrix 2 Pro trucks. Come as a set of 4 to do both trucks.
£23.95
MBS Matrix III 10mm 50mm Axle
This is a 50mm 10mm Axle which is smaller diameter than the standard axle on the Matrix 3 Trucks. If you wanted skate style wheels and bearings you can just change these over.
£12.95
MBS Matrix III 70mm 12mm Axle
This is a 70mm 12mm Axle which is 20mm longer than the standard axle on the Matrix 3 Trucks. If you need to add electric drives or want a wider truck you can just change these over.
£11.95
MBS Matrix Pro Matrix2 M3 Kingpin Bushes
These are the replaceable wearing bushings for the kingpins in the matrix pro trucks, matrix II and also matrix III trucks kingpin bushings.
£4.95
MBS Mountainboard Wheel Bearings
The MBS bearings are the same as MBS use in their complete mountain boards. They come in 9.5mm and 12mm sizes and fit most kite and downhill boards we sell.
£13.50 - £17.50
MGP Madd Gear Kick Axle Bolt Set
These axles and spacers fit the Madd Gear Kick model scooters. The standard front axle for forks and rear axle. Come with two rear axle spacers.
£6.95
Moon E-Skate MBS Matrix 2 Riptide Bushings Pair
Riptide Bushings used on the Lacroix Hypertruck. The bushings are far superior PU than the standard mbs shockblocks. You need the holder kit for these they won't fit standard trucks. Sold as Pair
£17.95
Moon E-Skate MBS Matrix Truck PU Kingpin Bushes
A big upgrade to the MBS Matrix Truck Bushes, cast from 96a PU Polyurethane reduces wear and gives a snugger fit in the Matrix 2 and Matrix 3 Truck hangers. Pack of 4 Bushes
£14.00
Moon E-Skate MBS Rockstar 2 Hub Bearing Spacers
MBS never produced spacers as not needed for general mountainboarding. But now Moon E-Skate have done them! Great for kiteboarding or electric boarding.
£7.50
Mystic Adaptive Safety Leash Eye
Have your safety leash where you want it. Simply attach to a webbing strap on your harness and you have a point of attachment for your safety leash!
£9.95 £6.50
Ozone Bar Depower Line Replacement
This replaces the pu covered depower line on the push away loop ozone contact bar. If you line is showing wear and tear then replace without changing the chicken loop.
£12.95 - £16.95
Ozone Boston Valve Kite Pump Adaptor
This is the special pump adaptor to fit the ozone boston inflate valve. This lets you use any other brand of pump or if you have managed to loose your adaptor.
£4.50
Ozone Boston Valve Single Spare Part
This is the whole valve of the Ozone Boston valve. Needs replacing if the rubber one way valve breaks or the seals fail from sand and salt. Simple easy fix to the valve.
£6.95
Ozone Compression Strap
Always manage to go missing but really useful the Ozone kite compression strap is suitable for foils and inflatable kites to make it easier to go into the kite bag or be stored more in one bag.
£6.95
Ozone Contact Bar Spare Flag out Line
The Flag Out line for Ozone kites is the bungee which attaches your kite leash to your kite to be able to activate the safety system. Available in different sizes.
£9.95 - £14.95
Ozone Contact Bar V5 Cleat Base Upgrade Kit
This kit is assembled and replaces the depower section and the cleat and depower line. This can fit the Ozone V4 bar to upgrade to V5 cleat or refresh a V5 Bar.
£39.95
Ozone Line Pigtails Set of 4
These are the replacement for the pigtails on the kite or can be used on the lines to correct line stretch.
£12.95 - £15.95
Ozone Soft Bar End Bungies (pair)
These are the line retainer bungies for the Ozone Bars with soft ends, contact bar V4 and V5 bar. Managed to break one then this will fix it.
£9.99
STX Slide in Fin Replacement
Managed to lose your fin or damage it? This is the standard slide in fin for STX Boards and many other brands such as Naish, OBrien etc.
£12.95 - £15.95
STX SUP Slide In Weed Fin
Lost your STX or N1SCO Weed Fin? No problem, we've got you covered! This weed fin also fits many other paddleboards using the slide in fin system.
£19.95
Trampa Bearing Spacers 12mm for Trampa Hubs Pack 4
This is a pack of 4 spacers and 4 o rings that go between the bearings on trampa hubs. They are for 12mm axle diameter and suit the 6001 bearing size.
£6.50
Trampa Ratchet Bindings Ladder Straps Black Pair
These are replacement Ladder straps to fit Trampa Ratchet or Camlock bindings. Sold as a pair without bolts perfect to replace worn bindings. Also fit MBS F3 bindings.
£11.95
Trampa Skate Truck Pivot Cups Pair
Get your skate truck on your mountainboard turning like it should do! Replace the pivots when they wear. Also fits many other brand trucks.
£3.50
Trampa Spring Retainers Pack of 8
These top hat bushings hold the springs into the trucks on the Trampa Channel Trucks. These would also fit most other brands of channel trucks.
£17.95
Trampa Springs Black Mountainboard
The trampa black mountainboard springs as popular on mbs boards. These fit pretty much every mountainboard that need springs in the trucks. Sold as a set of four springs.
£18.00
Trampa Springs Blue Mountainboard
Love blue and need new springs your mountainboard then the Trampa blue springs are just what you have been waiting for! Same strength as the other springs just Blue finished.
£19.95
Trampa Springs Red Mountainboard
Want a splash of colour on your dull trucks? Then red springs might be the answer. Same size and strength as all other springs but in a cool red finish.
£17.95
Trampa Springs Silver Mountainboard
The classic silver chrome mountainboard springs. These fit pretty much every mountainboard that need springs in the trucks. Sold as a set of four springs.
£17.95
Trampa Springs White Moutainboard
Bling up your channel trucks with the white Trampa Springs! look awesome with some red or bright coloured dampas. Same size and strength just a cool white finish.
£19.95
Trampa Truck Kingpin Bushing Refresh Set
This will refresh the kingpin bushings on Trampa Channel Trucks so the Infinity, Vertigo and Ultimate trucks. A wearing part in the truck to keep them turning smoothly.
£5.95
Union Binding Hardware Bolts M6
These are the standard mounting hardware bolts and washers supplied with Union Bindings. If you have managed to break or loose yours then get a set!
£9.95
out
of stock
of stock
Burton Spares Binding Ankle Buckles
Broke or Lost your Burton Binding's Buckle? worry no more, with the Burton Spares Binding Ankle Buckles we got your back!
£24.95
out
of stock
of stock
Burton Spares Binding Ankle Tongue Sliders
Perfect for repairs or simply to keep as a spare, the Burton Spares Binding Toe Ankle Sliders Replacement pack will have your back.
£12.95
out
of stock
of stock
Burton Spares Binding Toe Tongue Sliders
Keeping it as a back up, or for repairs, the Burton Spares Binding Toe Tongue Sliders is surely a must have!
£12.95
out
of stock
of stock
Kheo Coil Leash Mountainboard
This is the standard coil leash made by kheo which is required and recommended when you ride your board with releasable bindings. Stop those run away boards with a coil leash.
£16.95
out
of stock
of stock
MBS Skate Truck Pivot Cups
If you have mbs skate trucks or other mountainboard skate trucks and are getting wobble or hard to steer on old trucks then check the wear on the pivot cup. Simple to replace but makes a big difference in ride.
£3.50
out
of stock
of stock
Moon E-Skate MBS Matrix 2 Riptide Bushing Mod Kit
This kit will modify your Matrix2 trucks to fit the Riptide Bushings used on the Lacroix Hypertruck. The bushings are far superior PU than the standard shockblocks. Sold as set for a pair of truck without bushings.
£29.95
out
of stock
of stock
North Kiteboarding Hyperflow Replacement Valve
This is the replace a worn standard valve on the North Kiteboarding kites. Sometimes the threads get worn from sand and salt and don't seal as well. Replace valve and sorted!
£13.95
out
of stock
of stock
North Kiteboarding Line Connectors Pigtails Set
Pigtails wear over time and need replacing so grab a new set for your North Kite to keep things nice and new on the kite. Also can be used to correct line stretch issues.
£15.95
out
of stock
of stock
Ozone Kite Pump V2
The new Ozone pump is like a breath of fresh air, longer shaft and almost frictionless it makes it super easy to inflate all Ozone kites and most other brands too.
£44.95
out
of stock
of stock
Ozone Megatron Chickenloop Push Loop Medium Loop PU Repair Kit
This repairs the worn PU on a Push Loop Chickenloop. You still use your existing metal parts and locking finger with the kit upgrading the PU and line only.
£15.95
out
of stock
of stock
STX Composite Slide in Fin Upgrade 9in
Want to upgrade the fin on your STX or other compatible brand then this fiber honeycomb core performance fin steps the game up! Looks as awesome as it rides!
£59.95
out
of stock
of stock
STX Slide in Fin Replacement Lock Pin.
To secure your slidein fin, using this clip. Will fit most slidein fins.
£3.50
out
of stock
of stock
Trampa Abec 5 Red Channel Bearings
Trampa Reds bearings are perfect for any 12mm axle mountainboard and are super smooth bearings to get you moving at speed.
£19.95