There’s nothing in your cart

Trampa VESC HD-60T Twin Electric Speed Controller

The VESC HD-60T Twin is the latest speed controller and perfect for electric mountainboards. Loads of power and control with full customisation if you wish it.

£390.00 - £423.00
In Stock & Available for delivery

The VESC HD-60T Twin Electric Speed Controller is an amazing piece of kit packed into a pocket sized controller.  The aim of the HD was to provide the same power as the now legendary VESC6 controller in Twin unit for two motors and as small a size as practical to save size, weight and make it easier to connect everything. More than two years in the making the HD-60T has achieved all it's goals and is set to be the default controller for many Electric Mountain boards running the now standard 12S battery size.  The VESC6 was the only real choice before the HD-60 was launched but now this will be all that is needed unless you need higher voltage or other specialist requirement.

The Trampa VESC HD-60T Speed Controller is small but packs a punch and manages temperatures generated from high current applications like off road riding.

VESC stands for Vedder Electronic Speed Controller and is the brainchild of Benjamin Vedder a guru in the electric speed controller world.  The VESC software and general hardware is an now an open source project with collaborators around the world tweaking the features and pushing the boundaries along with the creator. Benjamin works with the Trampa design Team to produce Official VESC hardware which is optimised for the software. Working perfectly with the VESC Tool Android App or VESC Tool PC application all the settings can be set and tweaked to your hearts desire. If you want it simple and not tweak then this too is easy to auto setup and ride!  You can use a VESC on a esk8 or a mono wheel or unicycle or a robot or industrial truck or basically anything you need to control a motor with. But the smoothness in the VESC is what has made it the standard for ESk8 and Electric Mountainboarding. If you want more info on the VESC project then check out https://vesc-project.com/

Depending on your setup then the standard controller will be fine but if you are using the Trampa Wand then the external Bluetooth Board is needed to increase the signal strength. If you are using a different controller then the inboard bluetooth is fine for VESC Tool App settings.

The Basic Specifications of the Trampa HD-60T Twin Speed Controller:

  • Power per channel: 100A, up to 75A continuous, 160A absolute max 
  • 60V rated including any voltage spikes (12S LiIon)
  • 3 shunt design
  • Ports: 2x SWD, 2x USB, 2x COMM, 2x CAN, 2x PPM, 2x SENSOR
  • Built in NRF 52840 wireless connection
  • 2x XT60 power connectors
  • 5V and 3.3V supply for external devices
  • Supports ABI, HALL, AS5047, TS5700N8501
  • ASS Ready (Advanced Sensor less Startup = Full Torque from 0 RPM)
  • Dimensions TWIN HD: 101 x 55 x 18mm
  • Weight: 225g

Check out the video below about the VESC HD-60T from Pavel ESk8 expert and see how small this really is and what it can do.

 

Trampa VESC HD-60T Twin Specs

Loading related products...

Specifications Trampa TWIN HD 60

- Power per channel: 100A, up to 75A continuous, 160A absolute max 
- 60V rated including any voltage spikes (12S LiIon)
- 3 shunt design
- Ports: 2x SWD, 2x USB, 2x COMM, 2x CAN, 2x PPM, 2x SENSOR
- Built in NRF 52840 wireless connection
- 2x XT60 power connectors
- 5V and 3.3V supply for external devices
- Suppports ABI, HALL, AS5047, TS5700N8501
- ASS Ready (Advanced Sensor less Startup = Full Torque from 0 RPM)

Dimensions TWIN HD: 101 x 55 x 18mm

Weight: 225g

Features

- Current and voltage measurement on all phases (three shunt design)
- Adjustable voltage filters
- built in IMU chip (accelerometer, gyro)
- Regenerative braking
- Traction control (single and twin setup)
- Sensor'd or Sensor less operation + hybrid mode
- ASS Ready (Advanced Sensor less Startup = Full Torque from 0 RPM)
- Configurable RPM-, current-, voltage- and power limits
- Input source: PPM, Analog, NRF Nyko Kama Nunchuck
- Communication ports: USB, CAN,UAVCAN, UART
- Throttle curve and ramping for all input sources
- Separate throttle curves for acceleration and brakes
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Display of speed, power, duty cycle, amp flow, estimated range and battery status on App
- Accumulated data from arrays of VESCs
- Real time data analysis and read out via communication ports
- Real time data analysis and read out via VESC-Tool APP or VESC-Tool software
- Adjustable protection against:

Low input voltage
High input voltage
High motor current
High input current
High regenerative braking current (separate limits for the motor and the input)
High RPM (separate limits for each direction).
Over temperature (MOSFET and motor)

With this VESC you get the following items
1x VESC HD-60T T6 Aluminium Heat Repellent Housing
1x VESC HD-60T T6 Aluminium Heat Sink Support Bar
2x Internal Silicon Seal to protect from the ingress of dirt & Moisture
2x Integrated AMASS XT60PW-MALE Power Connectors
9x 1036 Silicon Coated BLACK Motor Cables - 15cm long
6x 4mm Gold Plated Genuine AMASS Bullet connectors
4x M3x10mm Countersunk TORX Stainless Steel Construction Bolt
8x M2x 6mm Countersunk TORX Stainless Steel Construction Bolt
TWIN VESC 60HD Box Length - 100mm
TWIN VESC 60HD Box Width - 55mm
TWIN VESC 60HD Box Height - 18mm

If you have any questions on the product or ordering please call us or use the form below to send us an email directly about this product.